A groyne (groin in the United States) is a rigid hydraulic structure built from an ocean shore (in coastal engineering) or from a bank (in rivers) that interrupts water flow and limits the movement of sediment. It is usually made out of wood, concrete or stone. In the ocean, groynes create beaches or prevent them being washed away by longshore drift. In a river, groynes prevent erosion and ice-jamming, which in turn aids navigation. Ocean groynes run generally perpendicular to the shore, extending from the upper foreshore or beach into the water. All of a groyne may be under water, in which case it is a submerged groyne. The areas between groups of groynes are groyne fields. Groynes are generally placed in groups. They are often used in tandem with seawalls. Groynes, however, may cause a shoreline to be perceived as unnatural.
The term is derived from the Old French groign, from Late Latin grunium, "snout".
Video Groyne
In coastal engineering
A groyne's length and elevation, and the spacing between groynes is determined according to local wave energy and beach slope. Groynes that are too long or too high tend to accelerate downdrift erosion, and are ineffective because they trap too much sediment. Groynes that are too short, too low, or too permeable are ineffective because they trap too little sediment. If a groyne does not extend far enough landward, water (for example at a high tide combined with a storm surge) may flow past the landward end and erode a channel bypassing the groyne, a process known as flanking.
Maps Groyne
Working
A groyne creates and maintains a wide area of beach or sediment on its updrift side, and reduces erosion on the other. It is a physical barrier to stop sediment transport in the direction of longshore drift (also called longshore transport). This causes a build-up, which is often accompanied by accelerated erosion of the downdrift beach, which receives little or no sand from longshore drift (this is known as terminal groyne syndrome, as it occurs after the terminal groyne in a group of groynes). Groynes add sediment to the beach by capturing downward drift. However, this can cause severe erosion on shorelines downstream from the groyne. If a groyne is correctly designed, then the amount of material it can hold will be limited, and excess sediment will be free to move on through the system. However, if a groyne is too large it may trap too much sediment, which can cause severe beach erosion on the down-drift side.
In rivers
River groynes (spur dykes, wing dykes, or wing dams) are often constructed nearly perpendicular to the riverbanks, beginning at a riverbank with a root and ending at the regulation line with a head. They maintain a channel to prevent ice jamming, and more generally improve navigation and control over lateral erosion, that would form from meanders. Groynes have a major impact on the river morphology: they cause autonomous degradation of the river.
They are also used around bridges to prevent bridge scour.
Types
Groynes can be distinguished by how they are constructed, whether they are submerged, their effect on stream flow or by shape.
By construction method
Groynes can be permeable, allowing the water to flow through at reduced velocities, or impermeable, blocking and deflecting the current.
- Permeable groynes are large rocks, bamboo or timber
- impermeable groynes (solid groynes or rock armour groynes) are constructed using rock, gravel, gabions.
By whether they are submerged
Groynes can be submerged or not under normal conditions. Usually impermeable groynes are non-submerged, since flow over the top of solid groynes may cause severe erosion along the shanks. Submerged groynes, on the other hand, may be permeable depending on the degree of flow disturbance needed.
By their effect on stream flow
Groynes can be attracting, deflecting or repelling.
- Attracting groynes point downstream, serving to attract the stream flow toward themselves and not repel the flow toward the opposite bank. They tend to maintain deep current close to the bank.
- Deflecting groynes change the direction of flow without repelling it. They are generally short and used for limited, local protection.
- Repelling groynes point upstream; they force the flow away from themselves. A single groyne may have one section, for example, attracting, and another section deflecting.
Groynes can be built with different planview shapes. Some examples include straight groynes, T head, L head, hockey stick, inverted hockey stick groynes, straight groynes with pier head, wing, and tail groynes.
Gallery
See also
- Breakwater
- Drop structure
- Jetty
- Kerch Strait - needed to protect bridge piers from ice flows
References
Notes
- Construction Industry Research and Information Association (1990) Groynes in coastal engineering : data on performance of existing groyne systems, CIRIA technical note 135, London : CIRIA, ISBN 0-86017-314-3
- Crossman, M. and Simm, J. (2004) Manual on the use of timber in coastal and river engineering, HR Wallingford, London : Thomas Telford, ISBN 0-7277-3283-8
- French, P.W. (2001) Coastal defences : processes, problems and solutions, London : Routledge, ISBN 0-415-19844-5
- Hoyle, J.W. and King, J.T. (1971) The principles of coast protection, Lyndhurst : the authors, ISBN 0-903015-00-5
- Przedwojski, B., B?a?ejewski, R and Pilarczyk, K.W. (1995) River training techniques : fundamentals, design and applications, Rotterdam : Balkema, ISBN 90-5410-196-2
- Walker, D.J. (1987) Nearshore hydrodynamics and the behaviour of groynes on sandy beaches, PhD thesis, Imperial College London, 277 p.
- Yossef, M.F.M. (2005). Morphodynamics of rivers with groynes (Thesis). Delft University Press. ISBN 90-407-2607-8. Also published in the Delft Hydraulics Select Series (No. 7/2005).
External links
- Groynes in the Netherlands
- Channel Coastal Observatory - Groynes
- Yossef, M. F. M. (2002). The Effect of Groynes on Rivers - Literature review (Report). Delft Cluster.
- Coastal Wiki portal
Source of the article : Wikipedia
0 Comments