Wilkinson power divider

src: i.ytimg.com

In the field of microwave engineering and circuit design, the Wilkinson Power Divider is a specific class of power divider circuit that can achieve isolation between the output ports while maintaining a matched condition on all ports. The Wilkinson design can also be used as a power combiner because it is made up of passive components and hence reciprocal. First published by Ernest J. Wilkinson in 1960, this circuit finds wide use in radio frequency communication systems utilizing multiple channels since the high degree of isolation between the output ports prevents crosstalk between the individual channels.

It uses quarter wave transformers, which can be easily fabricated as quarter wave lines on printed circuit boards. It is also possible to use other forms of transmission line (e.g. coaxial cable) or lumped circuit elements (inductors and capacitors).

Video Wilkinson power divider

Theory

The scattering parameters for the common case of a 2-way equal-split Wilkinson power divider at the design frequency is given by

${\displaystyle [S]={\frac {-j}{\sqrt {2}}}{\begin{bmatrix}0&1&1\\1&0&0\\1&0&0\\\end{bmatrix}}}$

Inspection of the S matrix reveals that the network is reciprocal (${\displaystyle S_{ij}=S_{ji}}$), that the terminals are matched (${\displaystyle S_{11},S_{22},S_{33}=0}$), that the output terminals are isolated (${\displaystyle S_{23},S_{32}}$=0), and that equal power division is achieved (${\displaystyle S_{21}=S_{31}}$). The non-unitary matrix results from the fact that the network is lossy. An ideal Wilkinson divider would yield ${\displaystyle S_{21}=S_{31}=-3\,{\text{dB}}=10\log _{10}({\frac {1}{2}})}$.

Network theorem governs that a divider cannot satisfy all three conditions (being matched, reciprocal and loss-less) at the same time. Wilkinson divider satisfies the first two (matched and reciprocal), and cannot satisfy the last one (being loss-less). Hence, there is some loss occurring in the network.

No loss occurs when the signals at ports 2 and 3 are in phase and have equal magnitude. In case of noise input to ports 2 and 3, the noise level at port 1 does not increase, half of the noise power is dissipated in the resistor.

However, some modification can be done to achieve unequal power division at the output ports. By cascading, the input power might be divided to any ${\displaystyle n}$-number of outputs.

Maps Wilkinson power divider

See also

• Power dividers and directional couplers

src: www.researchgate.net

References

src: i.ytimg.com

External links

• Online Wilkinson Power Split Calculator
• Online Resistive Power Split Calculator
• Online Coaxial Power Split Calculator
• Wilkinson power divider tutorial with other power divider / combiner pages

Source of the article : Wikipedia